LOG130HDL
Remarks : Special arrangement required, please contact office for further information.
Specifications
Specifications
| Performance | |||
| Maximum line pull (winch) | 22 tons | ||
| Wire-rope max. length | 305 m | ||
| Wire-rope diameter | 22 mm IWRC 6x29F1 | ||
| Weight | 17,000 kg | ||
| Ground pressure | 24 kpa | ||
| Ground clearance | 585 mm | ||
| Shoe width | 900 mm | ||
| Drawbar pulling force | 233 kN | ||
| Swing speed | 11 rpm | ||
| Treval motor speed (high/low) | 5.3/3.0 km/h | ||
| Engine | |||
| Model | Mitsubishi D04FR-74kw | ||
| Type | Direct injection, water-cooled, 4-cycle, | ||
| 4-cylinder, diesel engine with watercooler turbo charger | |||
| Power output | (ISO9249) | 69.3 kw/2,000rpm | |
| (ISO14396) | 74 kw/2,000rpm | ||
| Max. torque | (ISO9249) | 359 Nm/1,600rpm | |
| (ISO14396) | 375 Nm/1,600rpm | ||
| Displacement | 4,249 L | ||
| Hydraulic System | |||
| Pump | Two Variable displacement pump + one gear pump | ||
| Max Discharge flow | 130x2 , 20x1 L/min | ||
| Relief valve setting | 34.3 Mpa | ||
| Travel motor | 2xaxial-piston, 2 step motors | ||
| Hydraulic oil tank (system) | 101/172 L | ||
| Swing motor | Axial piston motor | ||
| Refilling Capacities & Lubrications | |||
| Fuel tank | 275 L | ||
